mini contain gaz sf6 _LPG Cylinder Foot Ring Production Line

Product Description Company Profile

General: KYN 10-40.5 type AC metal-clad switchgear (hereafter referred to as “switchgear”) is a kind of complete indoor type with three phases, 50Hz, AC and single busbar system, used in 35kV net for power transmission and distribution. Product feature: It is a metal-clad type of switchgear, and it consists of two components, one is main body welded by sectioned steel and bent steel plate and another component is truck. It is the latest self-designed and developed version of switch by introduction of advanced technology in domestic and abroad. With advantages of a smaller size, a big breaking current, easier installation, a long-free-maintenance duration, this kind of switchgear has characters of easy operation and maintenance, safe operation, five-protection function and inter-lock capacity, etc as well. Note 1. The width of the cubicle is 1700 The packing size (width*depth*height) (mm) 2020*2380*2870 Ordering notice: A. Please provide primary main wiring system diagram, layout

Product Introduction RSC3000 series SF6 gas vacuumizing and refilling device is mainly used for installation, commissioning and maintenance of SF6 circuit breaker,SF6 transformer,GIS and other SF6 Electrical products.   Technical parameters Vacuum pumping rate:customizedVacuum time:according to vacuum pumping rateUltimate vacuum:<10Pa Leakage rate:<0.5%Transmission pipe:5mVacuum meter:pointer or digitalPower supply:380~460VAC 50Hz

Product Description Company Profile

  Application: The Outdoor Mounted  Bushing Current Transformer is self contained and designed to be mounted externally over the high voltage terminal bushing of 66kv to 500kv Power transformers, 66kv to 500kv Power circuit breakers and 66kv to 500kv Cable terminators .In most cases the BCT, with its ease of installation, is a reliable and economical solution when upgrading system protection and adding additional metering points.When properly installed, the  BCT can be used on higher system voltage levels while maintaining its own mere 600 Volt class rating. Its simple construction provides a low leakage product with virtually unlimited short circuit capabilities, far surpassing its stand alone wound-type counterpart.   Construction: The toroidal core is continuously tape wound using cold rolled grain oriented electrical grade silicon steel, which receives a full stress relief anneal after it is wound to its specified dimensions. The secondary winding is then wound of insulated copper

 PT Product High Performance Gas Insulated HV Transformer For Gis  Technical Parameters for JSQXF2-126 Voltage Transformer:1 Rated primary voltage: 66kV, 110kV, 132kV, 150kV and 220kV and so on.2 Rated secondary voltage: 0.1 /√3kV or 0.11 /√3kV.3 Rated voltage of residual voltage winding: 0.1kV or 0.11kV.4 Rated frequency and number of phases: 50Hz or 60Hz 3-phase.5 Voltage ratio, maximum rated output and corresponding accuracy class please see table 1. Table 1 Voltage Ratio, Maximum Rated Output and Corresponding Accuracy Class TablePT Product High Performance Gas Insulated HV Transformer For Gis Voltage Ratio (kV) Accuracy Class and Rated Output (VA) Secondary 1a-1n Secondary 2a-2n Residual da-dn 0.2 0.5 0.2 0.5 3P 66 /√3/ 0.1 /√3-0.1 /√3-0.1110 /√3/ 0.1 /√3-0.1 /√3-0.1132 /√3/ 0.1 /√3-0.1 /√3-0.1                      or220 /√3/ 0.1 /√3-0.1 /√3-0.1 75   75   300 75     100 200         150   150   300     6 Thermal